MLNX_OFED install failed at Ubuntu 14.04.2
Hello, I recently built up a linux server with Ubuntu 14.04.2 server and MCX353A-FCBT.Actually, I tested this with Ubuntu 14.04.01 version with no problem installing...
View ArticleWhile disabling the Virtual kernel mode driver running with heavy traffic,...
Hi All, I am working Virtual Kernel mode Windows WMI driver, for windows server 2012 R2 and using Mellanox 4.8 stack. While disabling the Virtual kernel mode driver running with heavy traffic, API...
View ArticleModify QP error (HCA reset)
I'm having an issue as of yesterday with a system that has a 40GB dual port daughter card in it. The network connections for the 2 ports are showing disconnected. I'm in a home lab with a single...
View ArticleRe: ESXi iSCSI over RDMA (iSER) IB driver
Looks like I will need driver 1.8.3 to get iSER support. The main reason I am looking for a iSER is because my ZFS server, Solaris 11.2 only has IB driver. It does not have Ethernet driver. It will not...
View ArticleClik here to view.
Re: Can I do L3 with SX1018HP switches?
Mellanox support gave me the licence keys.Thanks.
View ArticleRe: I am getting below error on RHEL-5.9 (2.6.18-348.el5) and...
Thanks yairi.... I will try this.... Rupesh.
View ArticleRe: ESXi iSCSI over RDMA (iSER) IB driver
Yes, SRP has no issue (AFAIK). if you can work with SRP instead of iSER, it is a better option then IPoIB. good luck!
View ArticleRe: Module error and RedHat 7.1
Yes, I installed kernel-{headers,tools,level}Since then, I have found that RedHat supplies their own infiniband software that works out of the box. Is there any reason/advantage to pursue OFED software...
View ArticleRe: How to change MCX354-FCBT port type under Windows 7 device manager
For firmware 2.32.5000 and above, there is an option to set port personality using mlxconfig tool. You need to have mlnx MFT first: Mellanox Technologies You can refer to section 2.1.1 page 20:...
View ArticleQUERY_FW command failed, err=-5, aborting when rebooting machine
Getting this error when trying to get a Connect EN card working on RHEL 6.3 64 bit. Have install the 2.4 drivers [root@XXXX ~]# cat /var/log/dmesg | grep mlCompat-mlnx-ofed backport release:...
View ArticleRe: Module error and RedHat 7.1
well, the core driver and protocols should be very much the same. the MellanoxOFED and the community OFED are a bit more advanced and may include fixes that didn't make it yet to the kernel. there is a...
View ArticleRe: VLAN setup on SR-IOV enabled Mellanox ConnectX-3 (CentOS7)
This "ip link sest" problem is resolved by upgrading ConnectX-3 firmware to 2.33.5000.But, hca_self_test.ofed shows FAIL/DOWN results. Any suggestion to resolve this? # hca_self_test.ofed ----...
View ArticleRe: VLAN setup on SR-IOV enabled Mellanox ConnectX-3 (CentOS7)
The script simply tries to query the VFs you've created for firmware version. Don't think there's anything wrong here. you'll see above that the real HCA is identified with 2.33.5000
View ArticleRe: Module error and RedHat 7.1
There may be features in Mellanox OFED with regards to performance that do not exist in RHEL inbox driver, regardless the next release in the upcoming months will support RHEL 7.1
View ArticleClik here to view.
Re: VLAN setup on SR-IOV enabled Mellanox ConnectX-3 (CentOS7)
Thanks, Erez! OK. If the failed VF firmware checking is fine... how about "Port State of Port #x on CA #0 (VPI)"? Before setting SR-IOV, that was not "DOWN".
View ArticleRe: Mellanox flash my SFP+ modules
Sorry for typo, Mellanox, Mellanox flash my sfp+ modules.
View ArticleRe: Infiniband for Mellanox Technologies MT25204
Thank U! It is. The tests do not work because of the different versions of perftest!
View ArticleRe: MCX354A-FCBT does not show "Port Protocol" tab in device manager after FW...
Hi, my question was on how to change it with the Windows device manager !I know that it can be changed with mlxconfig etc. I gave this information in my original email already.Is the "Port Protocol"...
View ArticleRe: How to change MCX354-FCBT port type under Windows 7 device manager
Hi, I know all this.Let me put the question diffferently:Is the "Port Protocol" tab still generally available after the FW update, or is this just a problem with my setup ? BRspeedy
View ArticleRe: As must be configured Infiban 40 GB integrating VMware 5.x
Hi Team!!! I have one questions: My customer have Communicate hypervisors 2 Cards Mellanox Technologies MT26428 . The question is: You can configure the Mellanox 40Gb cards working with vmware 5.5?...
View Article
