Re: Совместимость кабелей mellanox и cisco catalyst.
Hi Michael, Do you have issues with a Mellanox cables between 2 Cisco switches?I think you should contact Cisco for this issue. Also I don't see the PN MC2209124-005 at...
View ArticleClik here to view.
Does Mellanox OFED-1.5.3.-3.0.0 support "MT26428 [ConnectX VPI PCIe 2.0 5...
Please reply asap. Thanks,Rupesh
View ArticleRe: Совместимость кабелей mellanox и cisco catalyst.
Hi! Sorry, my English is bad. I'm connect Cisco switch's (2960x and 3850 - see my f'st message) and Mellanox netcard (Mellanox ConnectX®-3 Pro EN network interface card, 10GbE, dual port SFP+, PCIe3.0...
View ArticleClik here to view.
Does connectx-3 support VMWare VXLAN offload?
I see vxlan offload parameter for the module mlx4_core but I am unable to see the number of packets offloaded for vxlan. the tput is also very less ~ # esxcfg-nics -lName PCI...
View ArticleCisco Nexus 6004 and Mellanox QSFP
I am trying to get Mellanox QSFP cables (MC220731V / Active Fiber 40Gb/s, see attached picture) to work between a variety of vendor switches. However, I cannot get it to work on our Cisco Nexus 6004,...
View ArticleRe: Cisco Nexus 6004 and Mellanox QSFP
Did you try ProLabs cables? http://www.prolabs.com/data/downloads/5275.pdf They are based on Mellanox Cables but open for Cisco. steveburke can help here. Ophir.
View ArticleRe: Cisco Nexus 6004 and Mellanox QSFP
Thanks for the suggestion, I have not heard of ProLabs, but have reachedout to them to see if they have fiber AOC cables compatible with Cisco andMellanox.From what others have suggested, it does not...
View ArticleClik here to view.
Will this work? HP 10GB Mellanox Connectx-2 PCIe 10GBe and Windows 8.1 +...
Greetings, I'd like to ask, will this work? http://www.ebay.com/itm/671798-001-HP-10GB-MELLANOX-CON... + http://h20565.www2.hp.com/hpsc/swd/public/detail?swItem... Two of these adapters and Asus...
View ArticleClik here to view.
SX1012 link LED flashes red.
I have SX1012 in a test setup. Eth1/1 is connected to Connect-X3 56GbE NIC on Intel Xeon GPU server. I am using a split cable on eth1/2 and it is configure to have 4x10GbE, to which a custom FPGA board...
View ArticleClik here to view.
en3 not support tcpdump for broadcast
Any one knows this, tcpdump is not able to dump the broadcast pkts.Multicast, Unicast, Unknown Unicast are good to be dumped by tcpdump.Plus, ethtool -t ethx, self-test failed. Card infor: [root@test...
View ArticleClik here to view.
Re: Mellanox OFED 3.0 mlnx-ofa_kernel failed to build in sles12
The problem is that SLES 12 requires all init scripts under /etc/init.d to be LSB (Linux Standard Basic) compliant, and openibd does not.
View ArticleClik here to view.
Re: SX1012 link LED flashes red.
Hi Ramesh, The Ethernet port blinking Red (it's Orange Actually) - means that there are physical erros on the link. The LED labeled "!" which is the "Bad Port Led" indicates that a symbol error is...
View ArticleRe: Cisco Nexus 6004 and Mellanox QSFP
That's interesting. Can you try the following CLI on the Cisco switch(6004). #"service unsupported-adapter". Let me know the result. ~Rage
View ArticleFirmware update failed
When I installed OFED 2.4, it failed to update my firmware.The error message is : Querying Mellanox devices firmware ... Device #1:---------- Device Type: ConnectX3 Part Number:...
View ArticleRe: Cisco Nexus 6004 and Mellanox QSFP
I've contacted ProLabs and waiting to see if they can make a cable that might help us out.
View ArticleRe: Cisco Nexus 6004 and Mellanox QSFP
I already entered that command, but it did not work. See my original post for the error message.
View Article