Re: Backup an existing MLNX-OS Image on my switch
OK, So it seems you can't get the file from the switch.
View ArticlePCI-E Bus Errors with ConnectX-3 and Asus X-99E WS
Hi, I am experiencing several problems when using a ConnectX-3 40GbE adapter (MCX313A-BCBT) in an Asus X99-E WS motherboard. First it makes system startup quite unstable. Approx. 2 out of 10 tries, the...
View ArticleNo connection MT26428
Hello, I'm new to IB and have been working on it for two weeks now without success. Here are my hardware:2x Dell R510 server2x MT26428 Mellanox 40gig1xcisco 3064x switch I have installed Ubuntu server...
View ArticleIf I buy a used IS5030 switch will I be able to request a login to download...
I'm thinking of purchasing a IS5030 switch which as I understand has some decent management software included(like I think FabricIT)as opposed to just using something like openSM. However the download...
View ArticleRe: Does Spectrum support source based policy routing?
Policy based routing is supported.
View ArticleMellanox HPC-X environment variables. Use the map or the terrain?
Reading the (latest I hope) HPC-X manual http://www.mellanox.com/related-docs/prod_acceleration_software/HPC-X_Toolkit_User_Manual_v1.3.pdf I get a bit puzzled. There are several environment variables...
View ArticleMellanox FlexBoot hangs system startup
On all boots, the MCX313A-BCBT 40GbE adapter brings up the Mellanox FlexBoot screen. However on some occasions, it hangs and does not let the boot process continue.In such a case, it prints:Mellanox...
View ArticleRe: PCI-E Bus Errors with ConnectX-3 and Asus X-99E WS
Update: forcing the mainboard to use PCI-E 1.0 speed seems to solve the issue.This can be done in the BIOS utility -> Advanced -> PCH Configuration -> PCI Express Configuration -> PCIe...
View ArticleRe: If I buy a used IS5030 switch will I be able to request a login to...
Typically the support site and new versions download is reserved for contracted customers. You can certainly purchase a support contract for this switch. Mellanox support can help with that. Thanks..
View ArticleRe: How do I load the MLNX_OFED_LINUX driver into Debian 6.0.10?
Thank you, I have followed this path and now have the IB drivers in my environment.
View ArticleRe: Mellanox HPC-X environment variables. Use the map or the terrain?
MXM variables names are built at the run-time and by adding MXM_ prefix to it.
View ArticleRe: Firmware issue on HP brand ConnectX card
Hi Danny, This FW is only applicable to Mellanox branded HCA, with PSID/board id MT_0A50110002 and not applicableto OEM HCA with PSID HP_09D0000008 (fw-25408-2_9_1000-MHGH29-XTC_A1.bin).Also, these HCA...
View ArticleRe: Creating a child interface on windows 2008.
Hi Chase, Glad it worked for you. Regarding the question creating child interfaces here is the command to do that: part_man is used to add/remove/show virtual IPoIB ports. Each Mellanox IPoIB port can...
View ArticleRe: The show power command can not execute in MIS5030Q. Product release=1.0.2
Most likely this CLI command will work if the switch is upgraded to the latest software. This is very old software.I assume there are 2 power supplies installed in the switch. If there is only 1, then...
View Article