Re: digital optical monitoring
Ophir, Yes, I found that command but what I mean is Cisco has a similar command "show interfaces transceiver" that show more details about dBm (Tx and Rx Power) and more by enabling the ports as...
View ArticleRe: digital optical monitoring
Hi Daniel.no, only the command I mentioned to show the transceiver type. Thanks,Ophir.
View ArticleRe: Counters per VF?
Hi Adit,A fix for this issue was intoroduced in mlnx ofed 3.1-1.0.0 and it is also available in upstream kernel since 4.3. Eran.
View ArticleClik here to view.
How to dump mellanox connectx 3 libvma traffic with tcpdump?
or if I cant do it with tcpdump, how I can do it?
View ArticleFirmware for ConnectX-3 Cards with ISL PSIDs
Hello, This is my first post and I couldn't find any reference to my question. I have several ConnectX-3 cards I am trying to upgrade the firmware on. Specifically they are CX354A cards with P/N...
View ArticleInfiniband SX6036G/SX6018F and QLogic HP BLc 4X QDR IB Switch
Hi all, I'm really new to IB, and I'm having some issues while trying to configure my existing IB network with SX6036G gw and SX6018F switches to a new HP Enclosure with QLogic HP BLc 4X QDR IB Switch...
View Articlesx1012 link issue
Hi, So I have two new sx1012 connected to each other with fiber from two different buildings. They both have the same transceivers: [standalone: master] # show interfaces ethernet transceiverPort 1/1...
View ArticleRe: sx1012 link issue
We dont support third party LR4 or SR4 modules. That doesn't mean we do anything to prevent it from working but it may not work. If you provide us the length of the fiber in between, we can suggest a...
View ArticleRe: sx1012 link issue
Hi Anand, Here is the link for LR4 support:LR4 Support on Mellanox Switches It says:Here is the list of Mellanox switches and ports that supports LR4 module (Long Reach - QSFP), OPN: MC2210511-LR4 up...
View ArticleRe: sx1012 link issue
Hi Anand, If use 1012, which ports support Mellanox LR4 module? Thanks a lot.
View ArticleRe: How to enable wake-on-la (wol) on a mellanox InfiniBand card ?
Hello, I have ConnectX 2 card and WOL is not working either. Its running latest firmware 2.9.1200. Its not working in Linux and Windows either.Can some one help me out on this? Thanks!
View ArticleClik here to view.
Re: sx1012 link issue
Addition question about that connection: Is there some mode that I need to configure on the port to be aware that it is a Ethernet connection and not IB? Thank you,Daniel
View ArticleRe: sx1012 link issue
You need to configure the port type to be ethernet or InfiniBand. See here, step 7. HowTo Configure InfiniBand Gateway HA (Proxy ARP)
View ArticleRe: sx1012 link issue
Ophir, That command from step 7 "show ports type" or "port..." is not recognized on my sx1012. I ran some of the other ones that are mentioned in that link that work: [standalone: master] (config) #...
View ArticleRe: sx1012 link issue
All ports are ethernet,this command is applicable only for Gateway systems (you select which port is Ethernet and which ports are infiniBand) Ophir. Sent via the Samsung GALAXY S® 5, an AT&T 4G...
View ArticleRe: sx1012 link issue
Ophir, So, if all my ports are already ethernet and there is no specific settings that I need to configure, on my ethernet ports connected point to point with fiber, for me to see some traffic between...
View ArticleRe: How rdma driver converts IP address to the GID? How mlx4_en converts GID...
Start from kernel cma.c source file, you'll trace that address resolution finally is done by addr4_resolve function and then standard kernel address resolutions functions are called
View ArticleRe: CQE compression on ConnectX-3/Connect-IB
This feature is relevant to mlx5 driver and not for mlx4, so you can see the benefits of it on ConnectX-3. How do you know that is it doesn't work?
View Article