Re: How to switch ConnectX-3 from IB to ether mode on Windows Server
I resolved the issue. The MFT manual is wrong. "SETTINGS_PORT1" is wrong."LINK_TYPE_P1" is the correct parameter name. Also the value "3" (Auto) doesn't work in Windows, always recognized as IB and no...
View ArticleRe: Mellanox ConnectX-3 SR-IOV problem
Hey, Kyle, I am terribly sorry about the late reply. After posting my original question and waiting for month, I wasn't able to resolve it. So I had to pause the work and disassemble my test bed. I...
View ArticleClik here to view.
Re: SMB Direct
Hi,it should be better,make sure that RDMA is running. Try to follow this post, and send your feedback. HowTo Configure RoCE in Windows Environment
View ArticleWhat is the latest (last?) firmware for MTS3600Q-1BNC and how do I start the sm?
I recently acquired a 3600Q-1BNC. I'd like to upgrade it to the latest firmware. It isn't really clear from the download page which is the correct firmware, though I suspect it is:...
View ArticleClik here to view.
Re: determine value of conflicts and fabric simulate
Thanks, Boris Im anwer you an email.
View ArticleClik here to view.
Re: Mellanox ConnectX-3 SR-IOV problem
Dear Kyle, how did you get the KVM guest to start at all? mine failed complaining that iommu group issue root@vm-ha:~# virsh start kvm-node0error: Failed to start domain kvm-node0error: internal error:...
View ArticleRe: Connect-X adapter fails to receive invalid IPv6 frame
If the packed doesn't pass a validation HCA is dropping it.
View ArticleRe: Read port priority counters is 0 .
Hi,1.Can you send the output on the switch for the port priority counters?2. Can you send the running config of the switch, to make sure PFC is enabled.3. Which adapter is used?4. can you send the...
View ArticleRe: Is it possible to update the firmware on a Voltaire ISR9024D externally...
Hi Alfio, Try to power off the switch, wait for a few minutes and then power it on again and try the below command: spark -d **** -i verify And then: spark -d **** -i firmware.ISR9024D.img -nofs b
View Articleqperf version in RHEL6
Trying to update a RHEL6 server with mlnx-ofed-all-3.0-1.0.1.noarch installed and having dependency issues.When I run yum update all I get -Error: Package: mlnx-ofed-all-3.0-1.0.1.noarch...
View ArticleRe: Connect-X adapter fails to receive invalid IPv6 frame
In my use case, I need to use the adapter to send/receive invalid frames for testing purpose. Do you know how to disable the validations you mention? Thank you
View ArticleClik here to view.
Re: Are there any applications using RDS over InfiniBand?
Pretty sure RDS is not tested nor actually supported (not to say it won't work) by Mellanox and the questions on it may better be directed to Oracle, including test matrix and API.
View ArticleRe: Are there any applications using RDS over InfiniBand?
Thanks Ferbs.I found that RDS driver source has been integrated into MLNX_OFED, even though RDS is not tested and supported by Mellanox.Besides, the driver code is always updated in the latest version...
View ArticleRe: What is the latest (last?) firmware for MTS3600Q-1BNC and how do I start...
Hi Bob,The 3600Q-1BNC (predecessor to the IS503X switches) is listed on the EOL (end of life) page.The link below will let you download the latest SW image for this product.The SW image contains the...
View ArticleClik here to view.
Re: Read port priority counters is 0 .
Hi Seol,1) MLNX-OS Switch Configuration: a. Have you created a VLAN and set the switchports to hybrid (or trunk) mode? b. Have you Enable PFC on the switch and on the interfaces? c. Does the...
View ArticleRe: Is it possible to update the firmware on a Voltaire ISR9024D externally...
@yairi flint and mstflint gave MFE_UNSUPPORTED_DEVICE@eddie.notz. thanks, I will try that.
View ArticleRe: Read port priority counters is 0 .
Thanks, Ophir Maor 1. Switch Port 1 and 5 not packets counters switch-5e13ce [standalone: master] (config) # show interfaces ethernet 1/1 counters priority 3 Rx 0 packets 0...
View ArticleRe: Is it possible to update the firmware on a Voltaire ISR9024D externally...
Nothing. same error.My guess is that somehow one has to disable the write protect on the EEPROM, but I have no idea on how to do that...
View ArticleRe: Read port priority counters is 0 .
Thanks, Sophie Naudin 1. Swich configuration is Hybrid mode and enable pfc setting seems there is no problem. switch-5e13ce [standalone: master] (config) # show dcb priority-flow-control PFC...
View ArticleCan't install OFED 3.1-1.0.3
I tried to install this latest OFED release on Ubuntu 14.04, but it fails since the "libibverbs1" package is not included (only "libibverbs-dev" is included).
View Article