Clik here to view.
Re: Switch boot problem
hidid you get the image to download off the sx6018? if so can i have a copy of the MLNX-OS software please?
View Articlerdma_cm belong to kernel which is not a part of MLNX_OFED. how to fix that?
i got an errors when trying to restart openibd after install. centos 7.1 rpm -qa | grep...
View ArticleRe: Firmware/OS MLNX-OS IMAGE
Hi Bruce, What is the switch serial number? it's available from the "show inventory " cli command (chassis). regarding no response from Mellanox, that means that you even didn't receive any initial...
View ArticleRe: rdma_cm belong to kernel which is not a part of MLNX_OFED. how to fix that?
hm. when I add kernel support, then reinstall - and it works.
View ArticleRe: How to add a mellanox SR-IOV VF to a docker container ?
Looks like the best way to set the MAC for for the VF is 'ip link set vf <num> mac <mac>'.
View ArticleClik here to view.
Re: Firmware/OS MLNX-OS IMAGE
hello i submitted my request to mellanox several times (4 + now) over the last 2 weeks, have sent them 5 emails, now they bounce back from support@mellanox.com as blacklisted. no response at all from...
View ArticleRDMA_CM connection setup issues
Hi Mellanox RDMA community, I've come across a (painfully intermittent) problem establishing RDMA_CM connections between processes running on linux machines. The application involves 8 servers and 40...
View Articleany way to get round with IP_ADD_SOURCE_MEMBERSHIP in libvma?
libvma can use only ip_add_membership, but some exchanges giving only SSM. any ways to get round this problem?
View ArticleRe: PCI-E Bus Errors with ConnectX-3 and Asus X-99E WS
Could you try the latest 3.1-1.0.3 from http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers ?
View ArticleClik here to view.
Re: Firmware/OS MLNX-OS IMAGE
I recommend calling Mellanox to get a case opened properly and discuss support options.In the US, the support numbers on the website are these: Mellanox Call Center+1 408.916.0055Toll-free (USA...
View ArticleRe: MCX312A-XCBT ConnectXR-3 card with Mellanox SFP module 1 Gb Ethernet
This basically comes down to the implementation on how LOS is detected on the RJ45 versus the SFP+ module. In the optical case the LOS can be detected either via the LOS or the LOS of the pin detector,...
View ArticleBurn u-Boot mlnx-os to JFFS2 as .img file-
does anyone know how to programm the .img file of mlnx-os to the flash (JFFS2) 1GB flash drive built into the SX10XX series of switches ive a corrupt boot image. (thus no mlnx-os running) can only...
View ArticleHow to build openvswitch with dpdk for ConnectX-3 NICs?
I'm looking for instructions to build the latest openvswitch w/ dpdk while using connectx-3 nics from mellanox and if possible in SR-IOV mode ?Has anyone done this?
View ArticleRe: Firmware/OS MLNX-OS IMAGE
I have problem like this but cant have access to switch cli. Can I get switch serial number from ofed or ibutils ?
View ArticleConnectX Pro EN 313-BCCT how to get 40Gbe
iperf gives me max of 18Gb/s with th nic's direct attached and even worse 8Gb/s with the sx1012 interconnecthw: z800 LnkSta 5GT/s x 8 asus z10pe-d8 intel xeon server LnkSta 8GT/s x 8os: 2 x...
View ArticleMHGH28-XTC issue
Hi, I am trying to set up IB I have several MHGH28-XTC HCAs 1 appears to work but others do not. The working HCA has rev A3 on the label the others show A4. Running CentOS on the server with OFED. I...
View ArticleClik here to view.
Re: MHGH28-XTC issue
Premature posting I'm afraid. Appear to have sorted this out (I'm getting link lights now anyway). I used mstflint to query the PCI ID and then burn an older firmware on, 2.9.1 isn't working 2.8.6 is.
View ArticleRe: Burn u-Boot mlnx-os to JFFS2 as .img file-
Did you try to boot from second image?All Mellanox switche have a dual boot bank.
View ArticleClik here to view.
Re: Burn u-Boot mlnx-os to JFFS2 as .img file-
hiyesbootm ff600000it gets to a stage where ABCD comes up on the terminal.. then it just stops i also tried to burn it using flint etc. but it says the .img is corrupt. i usually only use .bin files...
View ArticleRe: Burn u-Boot mlnx-os to JFFS2 as .img file-
hiyes ive been very carefull not to adjust any commands saved in env those commands all work. switch is a SX6012 or SX1012... 12 port FDR the firmware is ok, and i can query the switch from IB, and...
View Article