Quantcast
Channel: Mellanox Interconnect Community: Message List
Browsing all 6230 articles
Browse latest View live

Error ESM: SM: sm_getSmInfo: Remote does not have the proper...

Hello,I setup a small IB vmware cluster as follow:2 x Dell poweredge R620 configured with esxi 6 + connectx-2 MHQH19B-XTR signle port (driver MLNX-OFED-ESX-1.8.3.0-10EM-500.0.0.472560.zip)1 x Storage...

View Article


Re: Error ESM: SM: sm_getSmInfo: Remote does not have the proper...

Hi Francesco, Probably the Intel switch SM has a non default SM_KEY configured.

View Article


Re: Error ESM: SM: sm_getSmInfo: Remote does not have the proper...

thank you so much for reply, i searched about my switch configuration and  i didn't found nothing about the switch SM_KEY configuration.....any help ?

View Article

Re: Connectx-4 VPI driver for VMware

Mmm...You said no VPI/IB support is scheduled for the near furure.I think  you must remove some specification from your VPI product spec sheet.ie. SRP, iSER, vSphere (It can only support VxLAN...

View Article

New MLNX_OFED 3.2 Update release + ConnectX-4/Connect-IB FW release

This is to let you know that we released today an update release for: MLNX_OFED 3.2-2.0.0.0ConnectX-4 FW 12.14.2036ConnectX-4 Lx FW 14.14.2036Connect-IB FW 10.14. 2036...

View Article


Image may be NSFW.
Clik here to view.

OpenFlow ethernet adapter supporting Vswitch

Hi, I am after an Ethernet adapter which can be controlled by OpenFlow to provide network Virtualisationover PCIE for KVM.I need load balancing of traffic based on hash function which I believe...

View Article

Image may be NSFW.
Clik here to view.

Connect Lustre Infiniband servers to Ethernet nodes across gateway

Hi allCan somebody explain me about some newbie questionCan I mount lustre file system from Infiniband fabric to the ethernet servers across gateway ?Question in this:     gateway SX6036G (in ethernet...

View Article

MLNX-OS 3.5.1002 is now available online

We are happy to announce the availability of MLNX-OS revision 3.5.1002This release supports all the switch platforms. Switch Systems Updates:1. New Systems at GA level : SN2700, SX1410, CS7510, SX1036...

View Article


Image may be NSFW.
Clik here to view.

Re: Error in ipoib

Hi Roman,1) What version of Mellanox OFED driver are you running?2) Could you please confirm that no firewall is configured on both servers.3) I am assuming you are opening a server/client relation...

View Article


Re: NFS RDMA on Ubuntu 15.10

It might be good to check the subject with OS vendor and the reason why they removed this option. Just in case, if you already asked it, it could be nice to have a link to discussion here.

View Article

infiniband: ofed installation in diskless environment

Good afternoon to everybody!Can someone help me... There is no problem to install drivers in diskfull environment (especially if there are only a couple of nodes), but in my case there is xcat that is...

View Article

Image may be NSFW.
Clik here to view.

Re: Trunks, pvlans, infiniband world

Hi, Sorry for the delays, Please see below physical layout I"m wondering if anything special needs to be setup like in the Ethernet world to prevent loops etc..?  Regards, Daniel

View Article

Re: MLX4 custom packet steering

Hello Gilad, Thank you very much for your reply. As a matter of fact, for the moment, I am resorting to a full software solution to fulfill my needs. I will contact you when I will have rigorously...

View Article


MLNX OFED 3.2 centos 7.2 with RT kernel error

Hello.I've updated my 7.1 centos to 7.2 and got a new kernelNext I compiled and installed RT kernel like in this article: How to build the CentOS 7 RT kernel - Hardware - WikiI need to say that I...

View Article

Re: MLNX OFED 3.2 centos 7.2 with RT kernel error

UPD2: I installed MLNX_OFED_LINUX-3.1-1.1.2.0-rhel7.2-x86_64-ext (it is old version only for 7.0) but it works.

View Article


Re: Connectx-4 VPI driver for VMware

I have to agree with Jae-Hoon above, these cards are Ethernet only on ESXi and it is definitely stated otherwise, I also show them with a release in 2014 so its really a shame we still do not have that...

View Article

Re: Connectx-4 VPI driver for VMware

I agree with you...:)I think most problem caused from changed environments.At first, VMware moved to ESXi.That's a compact hypervisor kernel, not a general purpose Linux kernel. The age of vSphere ESX...

View Article


Image may be NSFW.
Clik here to view.

Can VMA and DPDK be used together?

Want to know: The reason is I want to use mlx connectx-3 as my nic in intel-ONP alike servers, so i can virtualize as much appliances as possible while keeping latency as low as possible. Also want to...

View Article

MHQH19B-XTR and MSX6036F-1SFS

hi guys, I have very simple question... Is MHQH19B-XTR (40Gbs) fully compatible with MSX6036F-1SFS (56Gbs) switch?I understand that maximum speed can be only 40Gbs. tnx!

View Article

Re: MLNX OFED 3.2 centos 7.2 with RT kernel error

UPD3: also I installed MLNX_OFED_LINUX-3.2-1.0.1.1-rhel7.2-x86_64-ext . works fine. so the prob only in 3.2-2.0.0.0. Mellanox fix it please 

View Article
Browsing all 6230 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>