Re: dual-port HCA can ping if ib0 pair connected but not if only ib1 pair...
Hi justinclift,Thank you for your comment. I have tried the IP settings you posted. Things seem to work fine for the moment.I will check more as if those 2 links are really isolated.(when I run openmpi...
View ArticleClik here to view.
Re: dual-port HCA can ping if ib0 pair connected but not if only ib1 pair...
Hi Sorin,Yes, it is indeed a routing problem. I have tried the setting justin posted and things seem to work fine.Thank you!
View ArticleRe: voltaire 4036 cant connect to CLI
Did you try to factory reset procedure? You can reset configuration via reset button on your 4036's connector side. If you push the reset button during 40~50 seconds then 4036's password and etc...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hmmm, have you done an nmap scan across all of the 192.168.0.0/16 subnet (on both eth and IB networks), just to see if it's using a different IP address or something?
View ArticleRe: Old device type when updating flash
From memory, you'll need to grab a version of the Mellanox Firmware Tools prior to v3.x.x. This should do the trick (from the old site):...
View ArticleRe: error upgrading firmware
I just had a similar experience with the current fw version on flash displaying n/a and a DIFF DETECTED error. Used skip_is and so far so good. C:\mstflint_x64_2_7_2>mstflint -d mt25204_pci_cr0 -i...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Sure!But deleted configuration include serial console baudrate and MAC address of MGMT ethernet port...........IOI 2013/6/25 justinclift <socialmedia@mellanox.com> ** Mellanox Interconnect...
View ArticleRe: Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Did you ever find a way to read the existing EEPROM (not firmware) from a good 9024D-M? Asking because I found this when logged into mine: # pwd/usr/mst/bin# ls -ladrwxrwxr-x 2 root root...
View ArticleClik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
I take this back. With further investigation, the "eburn" command seems to write firmware images to an EEPROM. So, it's the same thing we already know how to do. Not much use.
View ArticleClik here to view.
Re: Re: Re: Re: ISR9024D-M
Interesting. I'll have to give it a shot tonight when i get home. Thanks
View ArticleRe: voltaire 4036 cant connect to CLI
yes I tried to do a factory reset but this did not change anything at all. I am connecting to the CLI using a serial cable and still cannot establish a connection. Any other ideas?
View ArticleInfiniband network in mixed environment (Windows/Linux)
Is it possible/supported to create an Infiniband Fabric in a mixed environment (Windows and Linux machines) such that a Windows machine can communicate with a Linux machine via native Infiband or via...
View ArticleCan I mix 10GigE and IB on an ESXi (v5.1 u1) host?
Just started building our VMware environment. The servers (DL380p Gen8) each have an MT26448 10GigE card installed. I would like to add in a QDR IB card on each server for the backend VMware...
View ArticleRe: Re: Re: ISR9024D-M
Well, here is some good news. I took one of the Vm servers off the network, connected it to the IB switch using the CX4 cable and now i can ping 192.168.2.9 but when i try to ssh to it, i get nothing...
View ArticleRe: Re: Re: ISR9024D-M
Sweet Im in and able to manage the switch vi the infiniband connection. The issue was that one of the nics on the box has the same subnet as the switch (192.168.2.x). The SM on the switch itself is...
View ArticleRe: Infiniband network in mixed environment (Windows/Linux)
Thanks a lot! This answer was exactly what I was looking for. Von: justinclift Gesendet: Mittwoch, 26. Juni 2013 00:49An: Wolfheimer, FelixBetreff: Re: - Infiniband network in mixed environment...
View Article
