Re: Mellanox license issue
Hi Jumpol, Have you tried that with SSH? Please try the following procedure. 1) Install a license key and write it to the memory. Log in to the CLI with ssh and performe the following commands; 1.1)...
View ArticleRe: Mellanox license issue
Dear Masahiro, Thanks for your answer, your information is useful. But current issue is that how I get license key from ? I should contact Mellanox or IBM? I've found only these optionUPGR-6036F-GW...
View ArticleClik here to view.
Re: Mellanox license issue
Hi Jumpol, I think it depends on whether IBM in your region also sells those license keys as well as hardware. But of course Mellanox will be able to help you get the license keys, and you can ask...
View ArticleRe: The latest UFM version is 4.0? do we have plan for next release?
The latest GA version for UFM is 4.9.0. You can get docs downloaded from http://support.mellanox.com/ - if you don't have account - follow link "Request login" on that page.
View ArticleRe: Some questions about mlx_core and mlx_ib parameter.
For #5 - you can check opensm version included with MLNX OFED by typing "opensm --version". For example on MLNX OFED 2.3-1.0.1 you will get "OpenSM 4.2.5.MLNX20140828.7f05469"On switches SM version is...
View ArticleFirmware upgrade for ConnectX-2
Hello,in three computers I have three dual port 10 Gb NICs ConnectX-2. I would like to upgrade their firmwares. I followed instruction how to identify correct adapter on:...
View ArticleRe: Firmware upgrade for ConnectX-2
Hi Rick, According to the PSID it's an IBM OEM card, so you can download the fw to it from: http://www.mellanox.com/page/firmware_table_IBM_Intelligent_Clusters regarding the 2nd question, no need to...
View ArticleRe: Some questions about mlx_core and mlx_ib parameter.
For #2, you can change back the mtu to 2K from 4K with using the below command for each physical port: echo "2048" > /sys/class/net/ib0/device/mlx4_port1_mtu
View ArticleRe: Firmware upgrade for ConnectX-2
Thank you very much for your fast reply. I updated the firmware without any problem. I found that other two cards are HP branded. I put into Google: HP_0CD0210010 and HP_0CD0210010 and I found that it...
View ArticleRe: The latest UFM version is 4.0? do we have plan for next release?
Many thanks.#1. When 4.9.0 will be released? the latest version is 4.8 in below link. http://support.mellanox.com/SupportWeb/software_products/fm_products/ufm/manualswe get the Release Notes ,Quick...
View Articlemlxfwmanager --query returns 'failed to open device'
When going through the process to update firmware on a Mellanox IB card, running the 'mlxfwmanager --query' command, we get a 'Failed to open device' error.What is the cause of this error?Can it be...
View ArticleRe: GPUDirect RDMA on ConnectX-2?
GPUDirect RDMA is supported on ConnectX-3 and later adapters.Support for GPUDirect capabilities (non-GPUDirect RDMA); are supported inherently by the drivers in OFED, Mellanox OFED as well as the...
View ArticleClik here to view.
Connect problems with ISR 9024 switch
I have a small test lab with 4 Windows 2012 servers and a Citrix Xenserver all system have Connect X2 VPI cards (MHQH19B-XTR) or embedded on MB. Node to node work fine using IPoIB on private subnet...
View ArticleMellanox IS5030 - Broken Firmware
Hi,I was attempting to update firmware on a IS5030 Mellanox IB switch. I mistakenly loaded fw-IS4-rel-7_4_3000-MIS5025Q_A1-A3.bin which is for the unmanaged switch. However to demonstrate my...
View ArticleRe: Re: fan speed on IS5023
Hello,Well, I managed to get the firmware updated and switch reset. A second attempt to update the firmware confirmed that the first attempt was successful. My IS5023 is still going full blast on fans...
View ArticleRe: mlxfwmanager --query returns 'failed to open device'
Hello,Do you have MFT installed and started ? "mst start" if you're running for example : "flint -d /dev/mst/mt4099_pciconf0 q" what do you get ?
View ArticleRe: 40Gbe with QSA
Hi,QSA reduced the port speed from 40GbE to 10GbE.There is no problem to connect LR module to the QSA for long reach in any of the ports Note: the LR4 module is used for QSFP ports and not for SFP...
View Article40Gbe with QSA
Hi, If I split a 40Gbe port with a QSA any issues then using 10Gbe SFP+ optics for 300m or using the LR4 optics with Ethernet (new latest code I know) ? I've just never tested it - I would expect it to...
View ArticleClik here to view.
Re: The latest UFM version is 4.0? do we have plan for next release?
Hi,UFM 4.9.0 is already out. usually customers can get it with their dedicated credentials from this link : http://license1.mellanox.com/LMManage/login.aspx Documentation including SDK is there as...
View Article