Clik here to view.
ping is not happening between MCX314A and MCX354A 40G Etherenet slots
I have connected two X86 machines with PCIe base 40 G MCX314A and MCX354A Ethernet cards. I am trying to point with point to point cable.I am not able to that one. I can able to find Ethernet ports...
View ArticleClik here to view.
How can I check ASIC version on my SX6036G
I saw a Ethernet Interface issue on your MLNXOS like below. How can I check ASIC revision?
View ArticleClik here to view.
Question about Dual SX6036G configurations on vSphere 6.0 Update 2
I made a tiny personal lab with 2 of SX6036G Gateway switches.During 1 month POC period later I have some questions below. Q1. Why ARP-Proxy mode enabled then IB SM was disabled?At first I think that...
View ArticleRe: Windows-Linux ConnectX-2 setup
Thanks for the reply! I got some downtime on the storage server to test and have two further clarifications/questions. - The WinOF version of ib_write_bw doesn't have the -R flag, and the -d flag only...
View ArticleRe: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Hi Jea-Hoon, Q1. Why ARP-Proxy mode enabled then IB SM was disabled? this is by design - SM can't run on the same switch where proxy-arp can run - this is documented in the MLNX-OS user manual Q2....
View ArticleRe: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Thank you for your quick exact reply...:) I know also default partition must be enable on fabric. But security reason I want to disable IPoIB function on default partition, not default partition...
View ArticleRe: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Hi, Try the below - I never tried it but it's available: switch(config)# no ib partition Default ipoib force
View ArticleClik here to view.
Re: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Okay!I tried your command via my iPhone with VPN.But force option wasn't accepted to MLNX-OS.I think if there is a modification on default partition then MLNX-OS apply the modification to all othere...
View ArticleClik here to view.
Re: ping is not happening between MCX314A and MCX354A 40G Etherenet slots
Hi!MCX354A is Infiniband HCA and MCX314A is Ethernet only Adapter.If you install Infiniband driver and MCX354A, you must change Ethernet mode then you will pining to MCX314A end-to-end connection...
View ArticleGetting this error in Oracle Linux 6.8 under /var/log/message || kernel:...
Hi Everyone, We are getting below error in one of physical server, Which makes the server inaccessible from remote because we getting disconnect frequently, Regarding this we have raised a SR with...
View ArticleFirmware number mismatch for...
Hi, I am trying to install a driver for DEL1090001019. When I install the firmware ( http://www.mellanox.com/downloads/firmware/fw-ConnectX3-rel-2_35_5100-01T7NW-Flexboot-3.4.648.bin.zip ) as...
View ArticleClik here to view.
Re: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Hi , I would suggest opening a support ticket with Mellanox support@mellanox.com
View ArticleConnectX-3 Pro for Windows Server 2016 TP5 Nano - WinOF powershell commands...
How can I change ConnectX-3 Pro adapter properties (5.19TP5 driver) or change RoCE mode (2/1) using a WS2016 TP5 Nano installation?WinOF powershell commands are not available inside Nano PowerShell...
View ArticleRe: Above 4G issue
The issue is that if you enable on the BIOS of any motherboard the above 4G memory decoding the SRP driver will not load in any version of Windows. Not sure if v5.10 support SRP, hope that this...
View Articlepassthru MT27500 ConnectX-3 SR-IOV via kvm-qemu cause host Redhat 6.4 crash
Hi there, When I tried to passthrough MT27500 ConnectX-3 SR-IOV via kvm-qemu, it always cause the host, RedHat 6.4, crash. Host: IBM dx360 m4 Redhat 6.4, default kernel kvm-qemu version...
View ArticleRe: passthru MT27500 ConnectX-3 SR-IOV via kvm-qemu cause host Redhat 6.4 crash
Are you use IB or Etherent And if you configure SR-IOV following following guide ?HowTo Configure SR-IOV for ConnectX-3 with KVM (Ethernet) HowTo Configure SR-IOV for ConnectX-3 with KVM (InfiniBand)...
View ArticleRe: passthru MT27500 ConnectX-3 SR-IOV via kvm-qemu cause host Redhat 6.4 crash
I'm using IB. Yes, I really configured it as HowTo Configure SR-IOV for ConnectX-3 with KVM (InfiniBand) that's why we see the 20:00.1 Network controller: Mellanox Technologies MT27500 Family...
View ArticleRe: passthru MT27500 ConnectX-3 SR-IOV via kvm-qemu cause host Redhat 6.4 crash
Do you found any special report when it crash ? Thanks
View ArticleRe: Ethernet Fabric
Dears, hope you wellI'm in Afghanistan now, but I want first to increase my knowledge then go on.it was suddenly I could be familiar with mellanox products.I prefer to be in touch with community or...
View ArticleRe: passthru MT27500 ConnectX-3 SR-IOV via kvm-qemu cause host Redhat 6.4 crash
Zhang Suo, Thanks. I didn't find anything about crash. Maybe I should say I don't know what I should look. Do you have any ideas about this? Where can I find logs/ error files etc... Which files are...
View Article